BES Building Environmental Systemswith Erick Mata · Ekong Tech

Learn how buildings actually work

Video lessons and plain-words reading on the mechanical systems inside high-rise buildings — HVAC, hydronics, cooling, air handling, sprinklers and more — taught by Erick Mata, a working Building Superintendent/Operator, from his Ekong Tech lesson library.

Watch free previews
Illustration of a building mechanical room — air handling unit, pumps, orange and blue piping — beside a cutaway of the tower it serves
7core topics, in order
50+lessons & counting
4free preview lessons
1working superintendent teaching

Start with a free preview

These four lessons are complete and free — watch them right here, no sign-up needed. When you're ready to go further, membership unlocks every series and the full reading library.

Free previewFire protection7:46

Fire Sprinklers Explained: Wet vs Dry — and Why Your Garage Is Different

Wet-pipe systems hold water ready in the pipes; dry-pipe systems hold pressurized air instead, so the pipes can run through cold spaces like parking garages without freezing. Erick walks through both, and why the garage under your building is protected differently from the floors above it.

Watch the 40-second Short ↗
Free previewControls

Thermostats, Explained — the Small Box That Runs Your Comfort

A thermostat doesn't make heat or cold — it senses, decides, and calls the equipment that does. This lesson explains what it's really doing when you move the dial, and why a badly placed or blocked thermostat makes a whole suite feel wrong.

Watch the Short ↗
Free previewHVAC

Fan-Coil Units — and Why a Blocked Vent Starves the Whole Unit

The fan-coil in a condo wall heats and cools by moving suite air across a water coil. Block its vent with furniture or stored items and the unit can't breathe — comfort drops and complaints start. Here's how the unit works, part by part.

Watch the Short ↗
Free previewPlumbing

Kitchen Drains, Explained — Traps, Vents, and Where the Water Goes

Under every kitchen sink is a small system with a real job: the trap holds a water seal against sewer gas, the vent keeps drainage flowing, and the stack carries it all away. A plain-words tour of the plumbing you use every day.

Watch the Short ↗

Systems covered

HVAC Boilers — plant, domestic & common areas VFD drives BAS — building automation Hydronic heating & cooling Cooling systems & chillers Makeup air units (MUA) Air handling units Fire sprinklers — wet & dry Fan-coil units Thermostats & controls Wastewater treatment Solar & 12V power Arduino, sensors & controls Plumbing & drains How home systems work

Prefer to read? Start here

Every video lesson comes with a plain-words reading version. Here's a free sample — members read the full library.

Free reading preview

Wet Pipe vs Dry Pipe Sprinklers: Why the Garage Is Different

A sprinkler system has one job: put water on a fire early, while it's still small. But the pipes that carry that water face a problem in a Canadian building — cold. Where a pipe runs decides which kind of system protects it.

In a wet-pipe system, the pipes are full of water all the time, held under pressure right up to each sprinkler head. When heat from a fire opens a head, water is already there — it sprays immediately. Wet systems are simple, fast, and reliable, so they're used almost everywhere inside the heated part of a building: suites, corridors, amenity rooms.

A parking garage is different. It's exposed to winter air, and water sitting still in a pipe would freeze, expand, and burst the pipe. So garages use a dry-pipe system: the pipes hold pressurized air instead of water. The air pressure keeps a valve at the system riser closed against the water supply. When a head opens, air escapes, pressure drops, the valve trips — and only then does water rush into the pipes and out of the open head.

Members keep reading

The full guide follows the water through the whole system — riser, valves, gauges, and a superintendent's walk-through checklist.

The learning library — by topic

Seven core topics, in the order a building's heating plant fits together. Every topic starts with a free sample; membership unlocks the full lessons and reading guides.

01
HVAC

HVAC System

The whole heating, ventilation, and air-conditioning picture — how the parts work together, how heat is made and moved, and how an operator works a problem in order instead of guessing.

Free sample preview

Start with the sample lessons on YouTube: the troubleshooting method from HVAC Troubleshooting, Explained, and the heat basics from Heating Principles.

02
Heating plant

Boilers

The heart of the heating plant: how boilers turn fuel into hot water and steam, the parts around them, and what an operator watches to keep the plant running safely and efficiently.

Free sample preview

Watch the opening lessons of Boilers Explained free on YouTube — how a boiler works, part by part, in plain words.

03
Domestic hot water

Domestic Boiler

Separate from space heating, the domestic boiler makes the hot water for taps, showers, and laundry — and it works on its own schedule, all year, even in summer. Here's how that system is put together.

Free sample preview

Start free with Hot Water & Steam on YouTube — where domestic hot water comes from, and how steam fits into a building's heating.

04
Hydronics · Suites

Fan Coil Boiler

How boiler water reaches every suite: the hydronic circuit carries the heat, and each fan-coil unit delivers it room by room. Follow the loop from the plant to the coil in the wall.

Free sample preview

Watch the free fan-coil lesson — why a blocked vent starves the unit — and start the draw-along Hydronic Circuit series on YouTube.

05
Common areas

Common Areas Boiler

Lobbies, corridors, amenity rooms, and the garage don't heat themselves — a boiler circuit serves the common areas separately from the suites. How that circuit is arranged, and what changes when it isn't keeping up.

Free sample preview

The free opening lessons of Boilers Explained cover the plant behind common-area heating — watch the sample on YouTube.

06
ControlsVideo lessons coming soon

VFD — the Drive That Controls the Boilers

A Variable Frequency Drive (VFD) controls the motors on boiler pumps and fans. Instead of running full-speed or nothing, the drive slows the motor to match what the building actually needs at that moment.

Free reading preview

Think of a VFD as a dimmer switch for a big motor. A pump that only needs to move half the water doesn't have to spin at full speed — the drive feeds the motor exactly the frequency it needs, so the motor turns slower, uses far less electricity, and starts gently instead of slamming on. On a boiler plant, that means pumps and fans follow the load through the day: quiet and efficient at part-load, full power only when the building truly calls for it. Members get the full reading guide — how the drive is set up with the boiler controls, what its display is telling you, and the faults an operator should recognize and report.

07
ControlsVideo lessons coming soon

BAS — Building Automation System

The BAS is the building's nervous system: one computer system that schedules equipment, watches temperatures and alarms, and shows the operator what every major system is doing — boilers included.

Free reading preview

Before BAS, every system in a building was on its own: the boiler had its controls, the air handlers had theirs, and the operator walked the plant to see what was happening. A Building Automation System ties them together. Sensors report temperatures, pressures, and equipment status to controllers; the controllers follow schedules and setpoints; and the operator sees it all on one screen — including the alarm the moment something drifts out of line. Members get the full reading guide: what the BAS does with the boiler plant day to day, how schedules and alarms are structured, and how an operator uses the system to catch trouble early.

Learn from someone who runs the building

Erick Mata is a Building Superintendent/Operator in high-rise residential buildings in the Toronto area — the person responsible, day and night, for the mechanical and environmental systems residents depend on: heating, cooling, air, water, and life safety.

On his YouTube channel, Ekong Tech (1,650+ subscribers), he turns that hands-on experience into lessons anyone can follow — building operators, new superintendents, maintenance staff, and curious homeowners alike. His teaching style is plain words first: short sentences, direct questions, and draw-along diagrams, so by the end of a series you can explain the system yourself.

Every lesson teaches how systems work — principles and understanding. Work that belongs to licensed trades stays with licensed trades; what Erick gives you is the knowledge to understand your building, spot trouble early, and talk to those trades with confidence.

Visit Ekong Tech on YouTube ↗

One membership. Every system.

Previews are free forever. Membership is for when you want the whole picture — every series, in order, with the reading to go with it.

  • All 7 core topics, unlocked — HVAC, boilers, domestic & common-area heating, fan coils, VFD, and BAS
  • The full reading library — plain-words guides for every lesson, not just previews
  • Learn in order — each series builds part by part, beginner-friendly from episode one
  • New lessons as they publish — new Ekong Tech series join the library
  • A superintendent's perspective — what actually gets checked, watched, and reported in a real building
Paid membership

BES Membership — Full Access

Everything on this page, unlocked: all series, all reading guides, all future lessons.

  • Full library — all 7 core topics & series
  • Full reading library
  • Free previews stay free — no account needed
  • New series added as they're released

Sign-up takes under a minute. Your membership price is confirmed in full before any payment. You'll get your sign-up details ready to send, plus the Ekong Tech channel link for new-lesson alerts.

Questions

What can I watch without signing up?

The four preview lessons above are complete videos, free right on this page — plus the sample reading guide. No account, no card. Membership is only for going further: the full series library and the full reading guides.

What does membership unlock?

All seven core topics in order — HVAC System, Boilers, Domestic Boiler, Fan Coil Boiler, Common Areas Boiler, VFD, and the BAS (Building Automation System) — with their full video lessons and reading guides, plus the rest of the Ekong Tech library: Cooling Systems, Air Handling & Makeup Air, Wastewater Treatment, Solar & 12V Power, Beginner Arduino, and How It Works In Your Home. VFD and BAS video lessons are in production; members get their full reading guides now and the videos first when they land.

Who is this for?

New and working building superintendents and operators, maintenance staff, condo and property-management teams — and homeowners who want to understand the systems in their own building instead of guessing.

Is this a trade certification course?

No. These lessons teach how building systems work — principles and understanding, from an experienced operator. Servicing, refrigerant handling, and other licensed work belongs to licensed trades; Erick's lessons help you understand the systems, spot issues early, and work with those trades confidently.

Where do the videos live?

All lessons are produced on Erick's YouTube channel, Ekong Tech. This site organizes them into series with reading guides, keeps the free previews in one place, and gives members the full library in learning order.